[ Home ]   [ Product List ]   [ Contact Us ]   [ Feedback ]  [Links]

WAXMAG ^® - FG:

WAXMAG ^®-FG is a filled pattern wax containing resin filler which is same as the one used in our filled pattern wax, WAXMAG ^®-F. Filler content is about 22% by weight. This filled wax also has very low ash content. Equipment set-up and normal handling requirements are the same as in the case of WAXMAG ^®-F which are necessitated due to the use of filler.

WAXMAG ^®-FG shares in common, the following characteristics with WAXMAG ^®-F :

• Filler is stable upto 170°C. Beyond this, it may reach the fusion point

• Nil sinkage-no chills are required

• Good mechanical strength-sturdy patterns

Besides the above, WAXMAG ^®-FG offers following advantages :

• Very low linear contraction

• Very smooth surface finish

• Short mould setting times

• High melt viscosity

• Good dimensional control-piece to piece variation is almost eliminated

As also in the case of WAXMAG ^®-F, filler does not melt for it's good use, alongwith other components in  WAXMAG ^®-FG, and filtration will remove filler from molten wax. Thus, it becomes necessary to replenish entire filler content every cycle for reuse after dewaxing, if filteration is carried out.

          CLICK HERE TO VIEW THE SPECIFICATIONS

[ Home ]   [ Product List ]   [ Contact Us ]   [ Feedback ]  [Links]